therafin-corporation
Results: 109
Electric Programmable Neater Eater
The Neater Eater Electric Version is a powered feeder designed for use by individuals with severe physical disabilities which make self feeding difficult. The feeding arm can be programmed so the spoon scoops food from the plate and brings it to the user's mouth. The device can be set up for five different diners and the automatic cycle of the spoon can be controlled in four different ways: A single eating cycle has the spoon run once; a Go While Pressed cycle has the spoon move only when the sw
Neater Eater Manual Version & Adapted Version
The Neater Eater Manual Version is a mechaincal feeder designed for use by individuals with severe physical disabilities which make self feeding difficult. The unit features adjustable springs that help the user to smoothly guide the spoon down into the plate and up to the mouth. Adjustable stops prevent the spoon from moving past the plate or too close to the user, and stop the spoon at the right height for the user's mouth. The plate is turned by the user. In the Adapted Version, an adjustabl
Adapt-A-Tray
The Adapt-A-Tray is a laptray designed to provide upper body positioning for people with spinal cord injury or neurological or severe physical disabilities who use wheelchairs. The system incorporates a tray with a hole-punched surface to enable attachment of brackets and padded blocks to aid in positioning of the upper extremities, equipment, communication aids, or activities. The starter kit includes one tray with holes, one overlay to create a smooth tray surface, four 45-degreec attachment b
90 Degree Whisper-Lite Swingaway Sip-N-Puff (Model 32555)
The 90 Degree Swingaway Sip-N-Puff System, model 32555, is a pneumatic switch designed to enable people with severe physical disabilities to propel powered wheelchairs using breath control. The system can be placed in a fixed position or installed as a swingaway unit by using the Pinned Split Collar with the Notched Step Collar. A plastic-coated gooseneck tube swings to the side and out of the user's way for better access when entering or exiting the chair. The system features a swing-away block
Whisper-Lite Swingaway Sip-N-Puff (Model 32651)
The Whisper-Lite Swingaway Sip-N-Puff, model 32651, is a pneumatic switch designed to enable people with severe physical disabilities to propel powered wheelchairs using breath control. The system is designed to be a swingaway unit, but it can be placed in a fixed position. Once the optimal air tube-to mouth position is set, the unit can swing out of the way by using the Pinned Split Collar with the Notched Step Collar so the user can get into or out of the chair. A plastic-coated gooseneck tub
Multi-Axis Offset Headrest Assembly (Model 32465)
The Multi-Axis Offset Headrest Assembly, model 32465, is seating hardware designed to attach offset headrests to standard wheelcahair frames. The entire assembly is designed to be used with small, large, combination, small lateral support, and neck rest style headrests (headrests sold separately). The heavy-duty assembly features an offset block that swivels on a ball for headrest adjustment in any direction, a straight bar that adjusts horizontally, a heavy-duty mounting ring, a durable mounti
Surelock Midline Swingaway System (Model 32691)
The Surelock Midline Swingaway System, model 32691, is a lightweight control switch accessory for mounting hardware designed to secure and position wheelchair controls for the user. The entire system is can be mounted to either the right or left vertical bar of a wheelchair with 7/8-inch frame tubing, or it can be mounted on either the back post or armrest of a wheelchair or connected to a multimount chair with a multimount adaptor clamp. An inner extension bar and outer extension tube allow fo
Attaching Hardware Kit (Model 31096H)
The Attaching Hardware Kit, model 31096H, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four truss head phillips screws, four mushroom head T-nuts, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included).
Attaching Hardware Kit (Model 33066)
The Attaching Hardware Kit, model 33066, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four 10-24 x 3/8 inch flat socket head screws, four 10-24 x 0.5 inch flat socket head screws, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included). COLOR: The screws are black.
Fixed Arm Troughs (Models 31339R, 31339L, 32339R, & 32339L)
The Fixed Arm Troughs are designed for use by individuals who use wheelchairs and have upper extremity disabilities. Available for the right or left arm, these troughs are made of heavy-duty plastic and are equipped with brackets that slide over the existing armpads. Models 31339R and 31339L are padded with Ensolite and models 32339R and 32339L are padded with imitation lambskin. COLOR: The troughs and the Ensolite padding are black. The imitation lambskin padding is natural.
Abductor Pads (Models 31429, 31430, 31431, 31466S, 31466M, & 31466L)
The Abductor Pads are designed to aid in positioning people who use wheelchairs. Made of textured urethane self-skinning foam, these pads come with 10-32 T-nuts embedded in all mounting holes. Models 31429, 31430, and 31431 have one-inch on center mounting holes and the 31466 series have 1.5-inch on center mounting holes. SIZES: Both styles come in small, medium, and large. DIMENSIONS: All pads are three inches tall. The small models are 3 inches wide in the front and 3.5 inches wide in the back
Lateral Pads (Models 31460S, 31460M & 31460L)
The Lateral Pads are lateral trunk supports designed for use by individuals who use wheelchairs. Made of textured urethane self-skinning foam, these pads are equipped with T-nuts in all one-inch on center mounting holes. SIZES: Small, medium, or large. DIMENSIONS (WxDxH): The small pad is 3.25 x 4.25 x 1.25 inches. The medium pad is 4.25 x 6.25 x 1.25 inches. The large pad is 5.25 x 6.25 x 1.25 inches. COLOR: Black.
Abductor Flip Down Kit (Model 31467)
The Abductor Flip Down Kit, model 31467, is seating hardware general designed to allow abductors and lateral pads to swing away during wheelchair transfers. Designed to be used with the manufacturer's Abductor Pads or Lateral Pads (see separate entries), this kit includes one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge, and mounting hardware. COLOR: Black.
Flip Down Kit With Abductor Pad (Models 31468S, 31468M, & 31468L)
The Flip Down Kit With Abductor Pad is seating hardware general and an abductor pad designed to aid in positioning individuals who use wheelchairs. This kit includes an abductor pad, one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge with push-button release, and mounting hardware. The Abductor Pad is made of textured urethane self-skinning foam and come with 10-32 T-nuts embedded in all m
Shoe Holders (Models 30101S, 30101M, 30101L, 30102S, 30102M, & 30102L)
Shoe Holders are foot positioners designed for use by individuals who use wheelchairs. Made of Haircell plastic with nylon straps with quick-release plastic buttons, these shoe-shaped positioners ensure proper positioning of the feet. The 30101 models have one-inch on center mounting holes. The 30102 models do not have mounting holes. SIZES: Both the 30101 and 30102 models are available in small, medium, and large. DIMENSIONS (WxL): The small holders are 4.3 x 6 inches. The medium holders are 4.
H-Harness (Models 31441, 31442, & 31443)
The H-Harness is a harness restraint designed to aid in the proper positioning of individuals who use wheelchairs. The harness fastens over the shoulders and arround the waist and attaches to the wheelchair with the grommeted reinforced nylon webbing straps. The cushioned nylon shoulder straps with reinforced webbing attach together with quick-release buckles. SIZES: Model 31441 is small, model 31442 is medium, and model 31443 is large.
Hip Belt (Models 31446, 31447, 31448, 31451, 31452, & 31453)
The Hip Belt is a pelvic restraint designed to aid in the proper positioning of the hips for people who use wheelchairs. The cushioned nylon straps connect with hook-and-loop material and attach to the wheelchair with grommets. Models 31446, 31447, and 31448 have single D-ring adjustment loops. Models 31451, 31452, and 31453 have double D-ring adjustment loops. SIZES: Both styles come in small, medium, and large.
Positioning Hardware
Positioning Hardware is seating hardware general designed for attaching positioning aids to wheelchairs. Available items include two-, four-, six-, and eight-hole adjustment hooks; drop hooks; drop hooks for thigh pad inner mount; drop hooks for thigh pad outer mount; side, bottom, and parallel flanges; latch tabs; universal rear bracket; and a swing tab U-bracket. Also available is a seatlock; a seatblock; a headrest mounting plate; a child's headrest support; an adult headrest support; and six
Solid Seat Inserts (Models 31640, 31641, 31645, 31646, 31647, & 31648)
Solid Seat Inserts are designed for use by individuals who use wheelchairs. Available in a choice of seven-ply birch wood or paper phenolic with or without a hand hole, these inserts can be used in a standard sling seat to provide support for a cushion or as a base for a custom seating system. DIMENSIONS:Models 31640, 31645, and 31647 are 16 x 16 inches. Models 31641, 31646, and 31648 are 16 x 18 inches. The birch models are 3/8-inch thick. COLOR: Models 31647 and 31648 are black. The other mode
Adjustable-Drop Hardware Kits (Models 32517 & 32518)
Adjustable-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four J-brackets, four L-brackets, and screws and locking nuts needed to adjust the brackets and to secure the brackets to the Drop Seat (see separate entry). The hardware in the Kits can be raised and lowered to adjust the Drop Seat. DIMENSIONS: Model 32517 fits chairs with 7/8-inch tubes and model 32518 fits chairs with one-inch tubes.
Fixed-Drop Hardware Kits (Models 32617H, 32618H, 32542H, 32603H, 32604H & 32543H)
Fixed-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four drop hooks, eight washers, and eight socket head screws. DIMENSIONS: Models 32617 and 32603 create a one-inch drop. Models 32618H and 32604H create a two-inch drop. Models 32542H and 32543H create a three-inch drop. Models 32617H, 32618H, and 32542H fit chairs with 7/8-inch tubes. The other models fit chairs with one-inch tubes.
Solid Drop Seat Systems (Models 31642 & 31643)
Solid Drop Seat Systems are solid seat inserts designed for use by individuals who use wheelchairs. The systems include a seven-ply birch solid seat insert and jeavy-duty J-brackets that may be adjusted to raise or lower the seat to achieve proper positioning for the user. The seat features cut out slots to fit around frame crossmembers. DIMENSIONS: The seat insert is 3/8-inch thick. Model 31642 fits chairs with a 16-inch seat and is 13 x 16 inches. Model 3143 fits chairs with 18-inch seats and
Drop Seats (Models 31649, 31651, 31655, & 31656)
Drop Seats are solid seat inserts are designed for use by individuals who use wheelchairs. Made of seven-ply birch, these seats have pre-drilled mounting holes and include T-nuts. Cutout slots fit around chair frame crossmembers. DIMENSIONS: Model 31649 fits chairs with 14-inch seats and is 14 x 11 inches; model 31651 fits chairs with 16-inch seats and is 15 x 13 inches; model 31655 fits chairs with 18-inch seats and is 17 x 15 inches; and model 31656 fits chairs with 20-inch seats and is 19 x 1
Swingaway Lateral Trunk Support (Models 31425, 31423, & 32492)
The Swingaway Lateral Trunk Support is designed to provide positioning support for people who use wheelchairs.Model 31425 is a Swingaway Kit with Pad and includes tapered L brackets, a swing-away hinge, an extender, all mounting hardware, and the support pad. The brackets can be arranged in a variety of configurations for flexibility and growth. The extender bracket permits extra flexibility in any direction. The supports flip out of the way while entering and exiting the chair and they have sin
Viewline Top Drop Quik-Fit Trays (Models 33006P, 33008P, 33010P, 33013P, 33006, 33008, 33010, & 33013)
The Viewline Top Drop Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. The moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 33006
Enduroline Top Drop Quik-Fit Trays (Models 33007P, 33009P, 33011P, 33019P, 33007, 33009, 33011, & 33019)
The Enduroline Top Drop Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. The Enduroline Trays are made of melamine-impregnated fiberboard. Models 33007P, 33009P, 33013P, a
Viewline Top Drop Quik-Fit Trays With Control Cutouts (Models 33025, 33026, 33027, 33028, 33029, 3330, 33031, 33032, 33033, 33034, 33035 & 33036)
The Viewline Top Drop Quik-Fit Trays with Control Cutouts are lap trays designed for use with powered wheelchairs with joysticks and other controllers. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. These trays also feature a cutout i
Enduroline Top Drop Quik-Fit Trays With Control Cutouts (Models 33037, 33038, 33039, 33040, 33041, 3342, 33043, 33044, 33045, 33046, 33047 & 33048)
The Enduroline Top Drop Quik-Fit Trays with Control Cutouts are lap trays designed for use with powered wheelchairs with joysticks and other controllers. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. These trays also feature a cutout
Viewline E-Z Lock Quik-Fit Trays (Models 33000P, 33001P, 33002P, 33017P, 33000, 33001, 33002, & 33017)
The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. The moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 33000P, 33001P, 33002P, and 33017P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits w
Enduroline E-Z Lock Quik-Fit Trays (Models 33003P, 33004P, 33005P, 33020P, 33003, 33004, 33005, & 33020)
The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. These trays are made of melamine-impregnated fiberboard. Models 33003P, 33004P, 33005P, and 33020P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide)
Enduroline Plus Trays (Series 31200)
The Enduroline Plus Trays are lap trays designed for use with wheelchairs. These trays are made of melamine-impregnated fiberboard. These moisture-resistant trays can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a PVC rim, and tray with straps and rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide), adult (fits chairs 14 to 17 inches wide),
Woodline Light Trays (Series 31100)
The Woodline Light Trays are lap trays designed for use with wheelchairs. These seven-ply birch trays have limitied moisture resistance and can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a three-piece wood rim, and tray with straps and rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide), adult (fits chairs 14 to 17 inches wide), extra wid
Valueview Tray (Model 3115)
The Valueview Tray, model 3115, is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): 23.5 x 19 inches. The straps are one inch wide. The tray is 0.25-inch thick. WARRANTY: This product is warranted against defects in workmanship and materials for 90 days from the date of purchase.
Viewline Plus Extended Wing Trays (Models 31226, 31224, 31227, & 3125)
The Viewline Plus Extended Wing Trays are lap trays designed for use with wheelchairs. These moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 31226 and 31227 have a black PVC rim. The other models do not have a rim. The extended wings are designed to fit around the back uprights of the chair and they accommodate growth. SIZES: Small and large. DIMENSIONS (WxD): The small models (nos. 31224 and 31226) are 19.5 x 23.5 inches with an 11.5-inch wide torso c
Top Drop Clamp Attaching System (Model 31070)
The Top Drop Clamp Attaching System, model 31070, is lapboard mounting hardware designed to secure trays to wheelchairs. This system enables the tray (not included) to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. Made of glass-filled nylon, the clamps adjust to fit arms of different widths and pads of d
Adjustable Height Channel Bracket Attaching System (Models 31897A & 31901A)
The Adjustable Height Channel Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These heavy-duty steel sliding spacers include all required mounting hardware for attaching to a tray (not included) and enable trays to slide on to the armrests from the front. The fixed braket, model 31897A, may be used with full-size and armrest-style trays and the flip-away bracket, model 31901A, is designed for use with armrest-style trays. The flip-away bracket perm
Steel Channel Bracket Attaching System (Model 30300)
The Steel Channel Bracket Attaching System, model 30300, is lapboard mounting hardware designed to secure armrest-style trays to wheelchairs. This heavy-duty steel bracket includes all required mounting hardware for attaching to a tray (not included) and enables a tray to slide on to the armrests from the front. This flip-away bracket fits standard wheelchair armpads and permits chair entry and exit without removing the tray. DIMENSIONS: Fits 1 1/8-inch high standard pads. WARRANTY: This product
"z" Tray Slide Bracket Attaching System (Model 32799)
The "Z" Tray Slide Bracket Attaching System, model 32799, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front. and the configuration of the bracket enables it to be attached to the underside of standard wheelchair armrest pads and the underside of the tray (mounting hardware is not included). A hook-and-loop strap attaching system (not included) may be used in conjunction with these brackets
"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)
The "U" Adjustable Width Tray Slide Bracket Attaching System, model 32798, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front and the configuration of the bracket enables it to be attached to the underside the of the tray and wrap around standard wheelchair armrest pads and attached to the underside of the armrest (mounting hardware is not included). These brackets can be mounted inside or
Public Aid Tray (Models 33050, 33051, 33052, & 33053)
The Public Aid Tray is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): Model 33050 fits 12-inch chairs and is 18 x 19 inches with a 12-inch wide torso cutout. Model 33051 fits 14-inch chairs and is 20 x 20 inches with a 13-inch wide torso cutout. Model 33052 fits 16-inch chairs is 22 x 21 inches with a 14-inch wide torso cutout. Model 33053 fits 18-inch wide cha
Tube Arm Bracket Attaching System (Models 31902 & 31907)
The Tube Arm Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to tube-style armrests from the front. The brackets are attaached at both ends of the tube, enabling the tray to be attached to the top of the armrests (mounting hardware is not included). hook-and-loop straps (not included) may be used with these brackets for extra stability. OPTIONS: Mounting hardware (no. 31096H).SIZES: Small (no.
Carpeted Scooterboard (Model 31717)
The Carpeted Scooterboard, model 31717, is designed primarily for use with children to encourage extension, provide vestibular stimulation, and promote head and upper trunk control. The unit is padded and carpeted, has chamfered corners, and includes 4 ball casters. DIMENSIONS: 12 x 16 inches. The casters are 2 inches in diameter. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
E-Z-Lock Tray Clamp (Model 31096)
The E-Z-Lock Tray Clamp, Model 31096, is lapboard mounting hardware designed to secure lapboards and trays to wheelchairs. This clamp is designed to attach any tray to any wheelchair arm using a simple locking motion. OPTION: An attaching hardware kit for securing the clamp to the tray is available separately ($10.50). WARRANTY: the manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
Armrest Fixed Bracket (Model 31897)
The Armrest Fixed Bracket, model 31897, is an add-on armrest bracket designed to allow any tray to be attached to wheelchairs. The 1/8-inch steel bracket has a baked epoxy finish. INSTALLATION: The bracket is attached to the underside of the tray using the included hardware; the tray is then installed on a wheelchair by sliding the bracket over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date o
Armrest Flip-Away Bracket (Model 31901)
The Armrest Flip-Away Bracket, Model 31901, is a bracket designed to connect trays to wheelchairs and allow the trays to be flipped up 90 degrees. The bracket is 1/8-inch steel with a baked epoxy finish and includes an aluminum flip bar and spacers. INSTALLATION: The bracket is attached to the bottom of the tray with the included hardware; the bracket slides over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 d
Comfortline Series
The Comfortline Series are lapboards designed for attaching to wheelchairs. The trays have a rectangular work surface and rounded torso cutout and are fabricated of wood and covered with foam padding and finished with molded satin vinyl. These trays are available in two models: the tray alone or the tray with straps. SIZE: Both models are available in child and adult sizes. DIMENSIONS (WxD): Child-size trays are 20.5 x 18 inches with a 12 x 6 inches torso cutout; adult-size trays are 23.5 x 22 i
Viewline Plus Series
The Viewline Plus Series are lapboards designed for attaching to wheelchairs. These trays are fabricated of transparent, unbreakable, scratch-resistant polycarbonate, and are available in tray only, tray with rim, tray with straps, and tray with rim and straps models. The juvenile tray has an oblong work surface; all other trays are rectangular. OPTIONS: Tray rims are available in a choice of anodized aluminum or PVC plastic. SIZES: All models are available in child, juvenile, adult, and extra-w
Enduroline Series
The Enduroline Series are lapboards designed for attaching to wheelchairs. These trays are fabricated of Melamine-impregnated fiber board with a woodgrain vinyl top, and are available in tray only, tray with routed stop groove, tray with anodized aluminum rim, tray with groove and straps, and tray with rim and straps models. All models have a rectangular work surface. SIZES: All models are available in child, adult, and extra-wide sizes. DIMENSIONS (WxD): Child-size models are 20.5 x 18 inches w
Thriftytray (Models 31128, 31129, 31255, 31256)
Thriftytrays are lapboards designed for attaching to wheelchairs. These hardboard trays have rectangular work surfaces and are available in four models: Model 31129 is an adult tray with straps; Model 31128 is an adult tray with foam pads and straps; Model 31255 is the extra-wide tray with straps; Model 31256 is the extra-wide tray with foam pads and straps. DIMENSIONS (WxD): The adult trays are 23.5 x 22 inches with a 15 x 9 inch torso cutout; X-wide trays are 25.5 x 22 inches with a 15 x 9 inc
Standard Viewline Plus Armrest Series
The Standard Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. The armrests are fabricated of transparent, unbreakable, scratch-resistant polycarbonate and are available in fixed or flip-away styles for both right and left wheelchair arms, and are available in armrest only or armrest with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 9.5 inches wide at the widest point, tapering to 8 inches. COLOR: The plas
Trimline Viewline Plus Armrest Series
The Trimline Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. Fabricated of transparent, unbreakable, scratch- resistant polycarbonate, the armrests are available in fixed or flip-away styles for both right and left wheelchair arms in tray only and tray with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 10.5 inches wide at the widest point, tapering to 6 inches. COLOR: The PVC plastic rims are black. WARRA
Standard Comfortline Armrest Series
The Standard Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests have foam padding covered in molded satin vinyl and are available in fixed or flip- away models for both right and left wheelchair arms. These armrests feature a molded cup holder recess. DIMENSIONS (WxD): 9.5 inches wide at the widest point, tapering to 8 inches x 22 inches. The armrests have a .5-inch thick wood base
Trimline Comfortline Armrest Series
The Trimline Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests are foam-padded and covered in satin finish vinyl. The armrests are available in fixed and flip-away styles for both right and left wheelchair arms and feature a molded cup holder recess. DIMENSIONS: .5 x 10.5 inches wide at the widest point, tapering to 6 inches x 22 inches. The foam padding is 1 inch thick. COLOR: Bl
Standard Woodline Light Reversible Armrest
The Standard Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest comes standard with a clear lacquer finish and is designed to be assembled by the user in either a right or left configuration. Model 31326 is a fixed armrest and Model 31328 is a flip-away style; all necessary mounting hardware is included with both models. DIMENSIONS: 3/8 inch thick x 22 inch
Trimline Woodline Light Reversible Armrest
The Trimline Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest has a clear lacquer finish and is designed to be assembled by the user in a right or left configuration. The necessary mounting hardware is included with the fixed model, Number 31302, and the flip-away model, Number 31309. DIMENSIONS: Both models are 3/8 inch thick x 22 inches deep x 10.5 inc
3-Hole Offset Board (Model 31652)
The 3-Hole Offset Board, Model 31652, is a transfer board designed for use by people who use wheelchairs. Made of 7-ply Finnish birch plywood with a lacquer finish, the board features 3 hand holes set at an angle to assist the in gripping as the user moves across the board. DIMENSIONS (LxW): 24 x 11.5 inches. WARRANTY: The manufacturer warrants this product against defects in materials and workmanship for 90 days from the date of purchase.
Wheelhold Board (Model 31569)
The Wheelhold Board, Model 31569, is a transfer board designed for use by people who use wheelchairs. This lacquered, 7-ply Finnish birch plywood board is designed to fit around the wheel of a wheelchair when the armrest is removed and is equipped with a tongue that fits between the seat and the wheel to secure the board during transfers. The board has a wide surface to assist with balance. DIMENSIONS (LxW): 28 x 11.75 inches. COLOR: Walnut stain. WARRANTY: The manufacturer warrants this product
Theraslide Transfer Boards
Theraslide Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are constructed from defect-free birch plywood and machined from 7-ply base board with 3 additional plies form-laminated over this surface from end to end, producing a smooth, uninterrupted surface. All edges are computer routed and the surface is machine- and hand-sanded and finished with multiple coats of semi-gloss lacquer/sealer. Models include the plain board, board with telescope and
Econoslide Series Transfer Boards
Econoslide Series Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are made from defect-free 7-ply birch plywood and have rounded corners, ends, and edges. The surface is machine-sanded and finished with clear lacquer. Models include the plain board, board with hand hole and telescope, board with hand hole, board with hand hole and notches, board with 2 hand holes, and board with 2 hand holes and notches. CAPACITY: 400 pounds. DIMENSIONS: All model
Big Handle Utensils (30975, 30980, 30985 & 30930)
Big Handle Utensil sets include a fork, knife, and two spoons with built up or extended handles designed for use by people who have difficulty grasping. The utensils have plastic-coated tube handles. DIMENSIONS: Model 30975 has handles that are 1 inch in diameter and 4 inches long; handles on Model 30980 are 1.25 inches in diameter and 4 inches long; handles on Model 30985 are 1.5 inches in diameter and 4 inches long. Extended handles are 5 inches long. WARRANTY: The manufacturer warrants these
Tash Sip 'n' Puff Adaptor (Model 32676), 1555 Adaptor (Model 32677), Joystick Adaptor (Model 32678), Mk2 Adaptor (Model 32679), & Adaptor Clamp Bushing (Model 32687)
Adaptor Clamps are switch mounting hardware designed to secure controls to wheelchairs. All models are made of steel and coated with black baked epoxy. The TASH/Sip-N-Puff Adaptor, Model 32676, is designed to hold the TASH joystick and other controls. The unit is equipped with a metal loop which allows the electrical cord to be slipped through without removing the end plug. Model 32677, the 1555 Adaptor, is a clamp designed to hold the Invacare 1555 remote joystick by utilizing existing joystick
Collar & Bridge Assembly (Model 32669)
The Collar & Bridge Assembly, model 32669, is a control switch accessory for mounting hardware designed to secure wheelchair controllers to the chair. The Collar allows a full range of motion while holding controllers such as joysticks and sip-n-puff goosenecks in a stationary position relative to the user. The Bridge Assembly includes plastic spacers to position the control unit at a proper distance from the collar. Pre-drilled holes on the front of the collar enable a variety of height adj
Softline Collar & Bridge Kit (Model 32685)
The Softline Collar & Bridge Kit, model 32685, is a control switch accessory for mounting hardware designed to secure and position wheelchair controls for the user. The device includes a breastplate with a bridge assembly, including plastic spacers to help position the control unit at the proper distance from the breastplate. The kit is designed to be configured and attached in any way that best suits the user with any or all of the following included pieces: 2 trimable hook-n-loop straps, 4
Therabrush (Model 30770)
Therabrush, Model 30770, is a long handled brush designed to assist people with physical disabilities with bathing. The device consists of a soft-bristled brush attached to an extra-long handle. The handle, which features two adjustable hand loops, can be bent or curved to the user's needs by heating. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
Shur-Gryp Digi-Sert (Model 30505)
The Shur-Gryp Digi-Sert, Model 30505, is an anal stimulator designed to stimulate bowel activity for people with lower body paralysis. The unit features a tapered Delrin tip with a movable retaining washer which adjusts for depth of penetration, and a formed plastic hand piece which secures to the user's hand using a hook-n-loop strap and thumb loop. The tip can be rotated and angled for optimum use. DIMENSIONS: The tip is .5 inch in diameter. WARRANTY: The manufacturer warrants this product aga
Flex-A-Mirror (Model 30800)
Flex-A-Mirror, Model 30800, is an inspection mirror designed for use by people with physical disabilities. The unit consists of an unbreakable, lightweight acrylic, oval-shaped mirror on a flexible shaft; the shaft is equipped with a handle and an adjustable hand loop. DIMENSIONS: The unit is 19 inches long overall; the mirror is 4 x 6 inches, and the shaft is 9 inches long. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of
Quad-Care Mirror (Model 30801)
The Quad-Care Mirror, model 30801, is an inspection mirror designed for use by people who are quadriplegic or who have other lower extremity disabilities. The break-resistant acrylic oval mirror has an adjustable hand loop on the handle and an additional finger loop on the flexible shaft. DIMENSIONS: The mirror is 4 x 6 inches, and the shaft is 12 inches long; the overall length of the device is 23 inches. WARRANTY: The manufacturer warrants this product against defects in workmanship and materi
Sock Aid Sticks (Models 30022 & 30023)
The Sock Aid Sticks are sock aids and stocking aids designed for use by people with physical disabilities. Both models have plastic- coated wood shafts and garter hooks at one end. The deluxe model, Model 3022, also has a push/pull hook at the opposite end and adjustable circular hand washers for easier gripping. DIMENSIONS: Both models are 5/8 inch in diameter and 34 inches long. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days from the
Button Hook / Zipper Pull Combo (Models 30086 & 30085)
The Button Hook/Zipper Pull Combo is a button hook and a zipper pull designed to assist people with physical disabilities with dressing. One end of the handle has a button hook imbedded in it and the opposite end holds a zipper pull. Model 30086 has a standard handle and Model 30085 has a ribbed handle. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days from the date of purchase.
Formed Sock Starters (Models 30007 & 30008)
Formed Sock Starters are sock aids designed to assist people with difficulty in bending to don socks. Both models are shaped from semi-rigid plastic. The deluxe model 30008 includes a tubular pull handle over polypropylene webbing and garter hooks to assist with holding. The standard model 30007 has a cord pull handle. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days from the date of purchase.
Mat Crutches (Model 31977)
Mat Crutches, Model 31977, are push up blocks designed to strengthen upper extremities. Each block includes a contoured hand grip. DIMENSIONS: Height is adjustable from 6 to 8 inches. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days from the date of purchase.
Ther-A-Pad (Model 31855)
The Ther-A-Pad, Model 31855, is a therapy mat designed to provide a padded surface for use during exercise and therapy. The closed- cell medium density foam padding has a waterproof, crinkled surface. DIMENSIONS: 3/8 inch thick and 5 feet square. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
Clear Food Guards (Models 31050 & 31051)
The Clear Food Guards are designed to assist people with physical disabilities in keeping food on the plate while eating by providing a high, curved lip with which to push food onto utensils. Fabricated of molded plastic, these see-through guards are dishwasher-safe. DIMENSIONS: The small model, number 31051, fits 5.5- to 7-inch plates, and the large model, number 31050, fits 8.5- to 10-inch plates. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for
Quad-Care Utensil Holder (Model 30910)
The Quad-Care Utensil Holder, Model 30910, is a utensil holder designed for use by people who are quadriplegic or who have difficulty grasping utensils. The device consists of a built-up palm block and an attached hook-n-loop strap with a thumb loop. A pocket in the palm block allows a variety of utensils to be inserted for use. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
Sta-Steady Paring Boards (Models 31034 & 31036)
Sta-Steady Paring Boards, Models 31034 and 31036, are cutting boards designed for use by people who have difficulty keeping food in place while cutting, paring, or peeling. Both models are constructed of high density plastic and have rust-resistant pins to anchor food, and two corner retainers to keep foods from sliding. Four suction cups on the underside secure the board to the countertop or other surface. DIMENSIONS: The standard model, number 31036, is 8 x 8 inches, and the deluxe model, numb
Set Of Four Weighted Utensils (Model 30925)
The Set of Four Weighted Utensils, model 30925, consists of a fork with weighted handle, knife with weighted handle, and two weighted spoons designed for use by people who have hand tremors or unsteady hands. The set consists of a knife, model 30926, fork model 30927, soup spoon, model 30929, and teaspoon, model 30928 all with plastic weighted handles to add resistance to movement. Each utensil is also available individually. DIMENSIONS: The handles are 4.5 inches long and .75 inch in diameter.
Coated Utensils (Models 30943, 30944, 30945 & 30946)
The Coated Utensils are coated spoons designed to protect teeth, lips, and gums during use. The nylon-coated spoons are available in teaspoon, model 30943, long spoon, model 30944, soup spoon, model 30945, and tablespoon, model 30946, models. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days from the date of purchase.
Set Of Four Cushion Grip Utensils (Model 30959)
Cushion Grip Utensils are eating utensils with built up handles designed for use by people who have incomplete finger flexion or other difficulties in grasping. The set consists of a cushion grip knife, model 30960 ($8.63), a cushion grip fork, model 30961 ($7.77), a cushion grip teaspoon, model 30962 ($7.52), and a cushion grip soup spoon, model 30963 ($7.77). Each of these utensils is also sold individually. Each utensil features a foam- padded handle to aid in grasping. DIMENSIONS: Handles ar
Arm Skates (Models 31911, 31912 & 31913)
Arm Skates are exercise skates designed to provide range-of-motion exercise for arms and shoulders. All models are equipped with ball rollers and padded fastening straps, and are lined with removable, padded, synthetic sheepskin. DIMENSIONS: The ball rollers are 1 inch in diameter. Model 31912 is 6 x 6 inches; model 31911 is 6 x 12 inches; and model 31913 is 6 x 18 inches. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of p
Deluxe Arm Skate (Model 31910)
The Deluxe Arm Skate, Model 31910, is an exercise skate designed to provide range-of-motion exercise for arms and shoulders. The unit is equipped with a three-point strap, 4 casters, and screw eyes which hook at four points for use with a weight resistance system. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
Skate Board (Model 31915)
The Skate Board, Model 31915, is a hand/wrist/forearm exercise table designed for use with an exercise skate. The table includes a vinyl-covered hardboard surface with a figure-8 pattern, a hand hole for carrying, and a metal rim on three sides. The unit can be clamped to a worksurface. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
Skate Resistance System (Model 31920)
The Skate Resistance System, Model 31920, is a system of pulley weights designed for use with an arm skate. The system consists of a C-clamp, cables, and 9 weights. DIMENSIONS: The C-clamp is 2.5 inches wide. WEIGHT: Each of the 9 weights is .4 pounds. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
Resist-A-Skate System (Model 31909)
The Resist-A-Skate System, model 31909, is a hand/wrist/forearm exercise table and exercise skate and pulley weight package designed to provide range-of-motion exercise for arms and shoulders. This package includes a Deluxe Exercise Skate, model 31910; a Skate Board, model 31915; and the Skate Resistance System, model 31909. These items are also sold individually; see separate entries. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days fro
Head Pointer (Models 32370 & 32371)
The Head Pointer is a headwand designed for use by people with physical disabilities. Two fully-adjustable models are available which consist of a head harness, chin strap, and pointer designed to hold its position once it is adjusted. SIZE: Model 32370 is an adult size and Model 32371 fits children. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days from the date of purchase.
Touch-N-Type Stick (Model 32300)
The Touch-N-Type Stick, Model 32300, is a typing stick designed for use by people with limited manual dexterity who type using a stick or pointer. The stick had an adjustable length flex comfort handle and a plastisol tip. DIMENSIONS: 12 inches long. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
Wheelchair Adaptive Hardware
Wheelchair Adaptive Hardware is seating hardware designed for attaching seating components to standard wheelcahir frames. Available hardware includes drop hooks, adjustable angle hooks, horseshoe clips, U-brackets, seat blocks and locks, strap hinges, adjustable headrest support brackets, and lateral trunk support brackets and pads. WARRANTY: The manufacturer warrants these products against defects in materials and workmanship for 90 days from the date of purchase.
Shur-Gryp Supp-A-Sert (Model 30605)
The Shur-Gryp Supp-A-Sert, model 30605, is a suppository inserter designed for use by people with physical disabilities. The device features a spring-loaded tip that expels the suppository only when it is inserted to the proper depth, and comes standard with a formed plastic handle, a hook-n-loop strap, and a thumb loop. WARRANTY: The manufacturer warrants this product against defects in materials and workmanship for 90 days from the date of purchase.
Digi-Sert Stimulator (Model 30500)
The Digi-Sert Stimulator, Model 30500, is an anal stimmulator designed to stimulate bowel function in people with physical disabilities. The stimulator has a stainless steel handle that adjusts to 5 positions, a Delrin probe and a polyethylene retaining washer which adjusts for depth of penetration. Cushion grip tape is also included to customize handle to fit flail hand. WARRANTY: The manufacturer warrants this product to be free of defects in materials and workmanship for 90 days from the date
Supp-A-Sert (Model 30600)
Supp-A-Sert, Model 30600, is a suppository inserter designed for use by people with physical disabilities. The device features a spring-loaded tip which expels the suppository only when inserted to the proper depth. It also has a fully adjustable stainless steel handle, and includes cushioning grip tape to customize the grip. WARRANTY: The manufacturer warrants this product to be free of defects in materials and workmanship for 90 days from the date of purchase.
Digi-Supp E-Z Reach Combo (Model 30700)
The Digi-Supp E-Z Reach Combo, Model 30700, is an anal stimulator and supossitory inserter designed for use by people with physical disabilities. The device features a molded plastic handle with a vinyl strap to secure it to the user's hand, and both the Digi-Sert anal stimulator and Supp-A-Sert suppository inserter attachments. The Digi-Supp is designed for use on a raised toilet seat, and is suitable for both right- or left-handed individuals. WARRANTY: The manufacturer warrants this product
Fone Flipper (Model 32320)
The Fone Flipper, Model 32320, is a telephone cutoff switch designed to allow people with physical disabilities to use the phone without having to lift or replace the handset. The device is a small lever that fits over connect button on telephone; the lever is flipped up to answer phone, down to disconnect. The device is operable with mouthstick. WARRANTY: The manufacturer warrants this product to be free of defects in materials and workmanship for 90 days from the date of purchase.
Inspection Mirrors (Models 30789, 30805 & 30806)
The Inspection Mirrors are designed to allow people with physical disabilities to examine difficult to see body parts or to aid in catherization. All models are mounted on a flexible shaft and have an adjustable hand loop. Model 30806 comes with its mirror mounted diagonally, and Model 30805 includes an additional thumb loop on the shaft. DIMENSIONS: Model 30789 includes a 5.5 inch square mirror on a 12-inch shaft; the overall length is 23.5 inches. Model 30805 has a 3 x 4 inch mirror on a 24-i
Econotray Series
The EconoTray Series are lapboards designed for use on wheelchairs. Fabricated of tempered hardboard with a woodgrain vinyl top, the trays are available in five models: the tray only, tray with 3-piece wood rim, tray with straps, tray with rim and straps, and tray with straps, pads, and a back strap. The Juvenile tray has an oblong worksurface, while the other models have a square worksurface. SIZE: The tray with straps, pad, and backstrap is available only in an adult size. The other models com
Woodline Series
The Woodline Series are lapboards designed for use by people who use wheelchairs. The trays are constructed of 7-ply birch plywood with a lacquer finish. Models include the tray only, tray with 3-piece wood rim, tray with straps, and tray with straps and rim. The juvenile tray has an oblong design, while the other models are square. SIZE: All models are available in child, juvenile, adult, and X-wide sizes. DIMENSIONS (W x D): The adult tray is 23.5 x 22 inches, with a 15 x 9 inches torso cutout
Viewline Series
The Viewline Series are lapboards designed for use by people who use wheelchairs. Constructed of transparent polycarbonate, models include the tray only, tray with anodized aluminum rim, tray with straps, tray with rim and straps, and the tray with the Quad Care Attaching System (see separate entry). The juvenile tray has an oblong surface; all other trays are rectangular. SIZES: The tray with the Quad Care attaching system is available in an adult size only; all other models are available in ch
Theratray (Models 31100 & 31105)
The Theratray, Models 31100 and 31105, are lapboards designed for use by people who use wheelchairs. The trays are fabricated of polyurethane foam to eliminate sharp edges, and strengthened by a 0.25-inch Aspernite wood insert. Both models include a fully molded rim and straps. DIMENSIONS: The Adult model (no. 31100) is 23.5 x 22 inches, with a 15 x 9 inches torso cutout. The oblong juvenile size (no. 31105) is 26.5 x 24 inches, with a 10.5 x 6 inches torso cutout. WARRANTY: The manufacturer war
Econoglide Transfer Boards
The Econoglide Series are Transfer boards designed to assist people with physcial disabilities in transferring from one surface to another. The boards are fabricated high density stress-relieved linear plastic. The moisture-proof boards are striate-sanded on one side and buff-sanded on the other. Models include the plain board, board with telescope and hand hole, board with hand hole, board with 2 hand holes, board with hand hole and notches, and board with 2 hand holes and notches. CAPACITY: 40
E-Z Slider Shoehorns
E-Z Slider Shoehorns are long-handled shoehorns designed to assist people who have difficulty bending with donning and removing shoes. Fabricated of Thera-coated spring steel, the shoehorns have non-slip handle grips. DIMENSIONS: Shoehorns are available in 12-, 18-, 24-, 30-, and 36-inch lengths. The handle grips are 6 inches long. WARRANTY: The manufacturer warrants this product against defects in materials and workmanship for 90 days from the date of purchase.
Cushion Grip Shoehorns (Models 30035, 30036, 30037, 30038 & 30039)
Cushion Grip Shoehorns are long-handled shoehorns and shoehorns with built up handles to assist people with difficulty in bending and grasping in donning and removing shoes. All models have padded foam handles with a rope loop. DIMENSIONS: Model 30035 is 12 inches long, model 30036 is 18 inches long, model 30037 is 24 inches long, model 30038 is 30 inches long, and model 30039 is 36 inches long. The foam handles are 5.5 inches thick. WARRANTY: The manufacturer warrants this product against defec
Soft Sock Starter (Models 30001 & 30010)
The Soft Sock Starter, models 30001 and 30010, is a folding stocking aid designed to assist people with difficulty bending or other physical disabilities in the donning of socks or stockings. The user bends the soft, flexible, translucent plastic form into a tube shape, slips the sock over it, inserts the foot, and pulls the rope handle to draw the sock over the foot. Both models have a foam rubber pad on the underside to hold the sock in place. Model 30010 includes reinforcing grommets where th
Tray Stay Clamping System (Model 31085)
The Tray Stay Clamping System is lapboard mounting hardware designed to attach trays and lapboards to wheelchairs. The modular clamping system allows the user to adjust the height and position of the tray by attaching the base channel system to the tray and inserting the appropriate spacers. The clamps are secured by an attachment knob. The system can be used to mount trays directly to the wheelchair armrest and crossbar, the armrest pad, or to the manufacturer's Extenda-Arms, which provides ad
Tray Clamps (Model 31086)
Tray Clamps, Model 31086, are lapboard mounting hardware designed to mount trays and lapboards to wheelchairs. These clamps provide a means of locking trays to wheelchair frames using one lever motion. WARRANTY: The manufacturer warrants this product to be free of defects in materials and workmanship for 90 days from the date of purchase.
Quad Care Attaching System (Model 31878)
The Quad Care Attaching System, Model 31878, is lapboard mounting hardware for use by people who are quadriplegics or who have upper extremity disabilities. The kit allows the user to attach a tray or lapboard to wheelchair armrests by using clear vinyl thumb loops to streetch elastic bands over baked epoxy metal attaching pegs. The elastic loop stretches around the armrest and the pull-ring hooks onto metal bracket. The kit includes elastic loops, vinyl pull-rings, and metal brackets with atta
Figure-8 Clamp (Models 32310 & 32310B)
The Figure-8 Clamp is a seating hardware and a mounting clamp for accessories designed for use with wheelchairs. The two-part clamp is used to attach controls, accessories, and other devices to wheelchairs. One side of the clamp accommodates .75-inch tubing and the other side accommodates 7/8 inch tubing. Deep-set cap screws are used to tighten clamp around tubing. Set screws can provide additional mounting stability. COLOR: Model 32310B comes in black. WARRANTY: The manufacturer warrants this p
Wheelchair Tray Easel (Models 31140 & 31141)
The Wheelchair Tray Easel, Models 31140 and 31141, is a bookholder with lapboard and an easel designed for use by people who use wheelchairs. The adjustable angle easel attaches to any lapboard with a front rim. Model 31140 is made of clear polycarbonate, and Model 31141 is fabricated of Melamine-impregnated fiberboard. Both models have a hinged, adjustable length leg brace for setting the angle of the easel. The easel includes a 1.5-inch front edge or lip. WARRANTY: The manufacturer warrants th
Deluxe Reversible Extenda Arm (Model 31094)
The Deluxe Reversible Extenda Arm, Model 31094, is lapboard mounting hardware designed for use with wheelchairs. The tubulat steel telescoping arm mounts under the armrest on standard padded or desk-length wheelchair arms to provide up to 8.5 inches of additional support for trays in front of the armrest. The device can also br retracted under the armrest overhang. This deluxe heavy duty version is reversible for use on the right or left side. WARRANTY: The manufacturer warrants this product to
Squeeze Machine
The Squeeze Machine is a deep touch pressure device designed for use by individuals with autism or hyperactivity disorder. This system is used for deep touch stimulation and produces a calming effect on individuals with autism or who are hyperactive. The user crawls in between two padded boards, which press the sides of the body. The source of pressure is an air pump controlled by the user. The user's head is placed beyond the boards in an area with soft, fuzzy padding, while the hands go throug
Electric Razor Strap
The Electric Razor Strap is a product designed for people with grasping disabilities or limited grip strength to shave with. The Electric Razor Strap is a cuff that fastens to the hand and holds an electric razor for a steady grasp while shaving. Adjustable straps make the razor conform to the hand and fit comfortably. The strap is ideal for users who have low grip strength.
Flex A Mirror
The Flex-A-Mirror: Self Inspection Mirror is an inspection mirror designed for users with arthritis, grasping difficulties or those with general upper extremity disabilities. The unit consists of an oval shaped mirror on a flexible shaft. The 9 inch long shaft features an adjustable hand loop on the handle that is easy for arthritic hands to hold. The long handle is flexible allowing users the ability to move it to different angles to see themselves or parts of the body that re difficult to see